Residential Controls – ZoneTrol™ II

Bell & Gossett : Hydronic Heating/Plumbing Accessories : Zone Control Valves

Zone-Trol-II

The next generation of zone controllers from Bell & Gossett brings 21st century technology to residential controls.

ZoneTrol™ II provides DHW priority timer, post purge function and pump exercise into an economical and user-friendly package.

With optional outdoor reset controls, the ZoneTrol II is a natural fit with today’s green building strategies. Your modern hydronic systems deserve a modern controller. Description

Xylem’s Bell & Gossett ZoneTrol II is a ready-to-install controller for hydronic circulators in residential and light commercial applications. All ZoneTrol II controllers are UL and cUL listed and feature multi-function LEDs that are visible without removing the cover for easy start-up and troubleshooting. All units are compatible with analog and digital 24 VAC thermostats, including “power stealing” designs.

The multi-zone controllers feature an advanced microprocessor design that provides domestic hot water (DHW) priority & timer, pump exercise and a post purge timer without the need for add-on circuit boards or modules. Four and six zone controllers are field expandable for up to 18 pumps and are available with integrated, pre-wired boiler reset or mix reset controllers. Units with reset controllers include all necessary sensors.

Optional Features (4 and 6 zone controllers only)
• Boiler Reset: Incorporates a pre-wired integral boiler reset controller into the ZoneTrol II enclosure. Reset controller cycles the burner to maintain the optimum system supply temperature relative to the outdoor air temperature. Warm weather shutdown functionality can be activated to prevent system operation above a user-selectable outdoor temperature threshold. All necessary sensors are included.
• Mixing Reset: For use on hydronic systems incorporating a variable speed injection pump. Incorporates a pre-wired integral mixing reset controller into the ZoneTrol II enclosure. Mixing Reset controller varies the speed of the injection pump to maintain optimum radiant loop temperature relative to the outdoor air temperature. The boiler return temperature is also monitored to ensure that the appropriate minimum water temperature is not violated. Warm weather shutdown functionality can be activated to prevent system operation above a user-selectable outdoor temperature threshold. All necessary sensors are included.

APPLICATIONS:
Controller for hydronic circulators in residential and light commercial applications
Features and Benefits

Post Purge Timer: Circulator(s) will continue to run for 90 seconds after thermostat opens and allows additional extraction of BTUs from high mass boilers. User adjustable settings are OFF and ON.
Exercise: Runs each circulator for 10 seconds after each 72 hours of inactivity. User adjustable settings are ON and OFF.
Expandability: 4 and 6 zone controllers can easily be connected via an RJ-11 cable to accommodate systems consisting of up to 18 circulators.
Five-year Warranty

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • ESP-TANKS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Xylem Water Systems Australia Pty. Ltd
Unit 3/1 Federation Way,
Chifley Business Park
3194 Mentone Victoria
Australia
Tel. +61 3-95517333
Fax +61 3-95510321
Australia Distributors

Queensland
Brown Brothers Engineers
50 Nestor Drive
Meadowbrook QLD 4131
Phone:07 3200 6488
Fax:07 3200 3822
New South Wales and Australian Capital Territory
Brown Brothers Engineers
211-215 Walters Rd
Arndell Park NSW 2148
Phone:02 9671 3666
Fax:02 9671 3644
Victoria and Tasmania
Brown Brothers Engineers
8 Damien Court
Dandenong Vic 3175
Phone:03 9793 9999
Fax:03 9793 0022
Western Australia
Advanced Pump Technologies
72 May Holman Drive
Bassendean WA 6054
Ph: 08 6143 1000
Fx: 08 6143 1009
South Australia and Northern Territory
WBS Pumps
6A Lasalle Street
Dudley Park SA 5008
Phone:08 8344 9927
Fax:08 8344 9925
New Zealand Distributors
Christchurch (head office)
Brown Brothers Engineers
197 Durham Street
Christchurch 8011
New Zealand
Phone: 3 365 0279
Fax: 3 366 6616
Dunedin
Brown Brothers Engineers
10 Timaru Street
Dunedin 9012
New Zeland
Phone: 3 456 2562
Fax: 3 456 2564
Timaru 
Brown Brothers Engineers
Unit 6/39 North Street
Timaru 7910
New Zealand
Phone: 3 683 1686
Fax: 3 683 1687
Auckland
Brown Brothers Engineers
124A Hugo Johnston Drive
Penrose, Auckland 1061
New Zealand
Phone: 9 525 8282
Fax: 9 525 8284
Hamilton
Brown Brothers Engineers
97C Norton Road
Frankton, Hamilton 3204
New Zeland
Phone: 7 847 5280
Fax: 7 847 1580
Wellington
Brown Brothers Engineers
9 Aglionby Street
Lower Hutt, Wellington 5010
New Zealand
Phone: 4 570 1500
Fax: 4 570 1499