4XWC – Explosion Proof Submersible Sewage Pump

Bell & Gossett : Wastewater Pumps & Packages : Sewage Wastewater Pumps

4XWC – Explosion Proof Submersible Sewage Pump

Features and Benefits

  • Impeller: Cast iron, two vane closed design for high efficiency and maximum wear life. Balanced for smooth operation.
  • Bronze Wear Ring: Replaceable to renew the running clearances and efficiencies to original conditions. Leakage diminishes considerably.
  • Casing: Heavy duty cast iron, volute type for maximum efficiency. 4″ ANSI class 125 cast iron flanged. Adaptable to slide rail system mounting.
  • Dual Mechanical Seals: Function independently for maximum motor protection. The failure of one seal does not affect the operation of the second. The upper seal uses carbon rotating and ni-resist stationary face materials. The lower seal uses carbon rotating and ceramic stationary face materials as s
  • Seal Sensor Probe: The pump has a moisture detection probe located in an oil filled seal chamber. If pumpage should leak past the lower seal it indicates to pump control panel a fault has occurred. Requires an Optional Seal Fail or Moisture Detection Circuit in the control panel.
  • Designed for Continuous Operation: Continuous duty submerged condition in water that is 40°C or below. Maximum runtime with pump unsubmerged for 71/2-15 HP is 1 hour and for 20-30 HP is 15 minutes. Motor is suitable for 10 starts per hour.
  • Bearings: Double row angular contact thrust bearing on 250TYS frame and single row deep groove thrust bearing on 210TY frame pumps.
  • Impeller Mounting Screw: 300 series stainless steel with antirotational locking patch.
  • Castings: All iron castings are ASTM A48 class 30 grey iron. Optional bronze impeller is ASTM B584 C87500 silicon bronze.

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • ESP-TANKS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Xylem Water Systems Australia Pty. Ltd
Unit 3/1 Federation Way,
Chifley Business Park
3194 Mentone Victoria
Australia
Tel. +61 3-95517333
Fax +61 3-95510321
Australia Distributors

Queensland
Brown Brothers Engineers
50 Nestor Drive
Meadowbrook QLD 4131
Phone:07 3200 6488
Fax:07 3200 3822
New South Wales and Australian Capital Territory
Brown Brothers Engineers
211-215 Walters Rd
Arndell Park NSW 2148
Phone:02 9671 3666
Fax:02 9671 3644
Victoria and Tasmania
Brown Brothers Engineers
8 Damien Court
Dandenong Vic 3175
Phone:03 9793 9999
Fax:03 9793 0022
Western Australia
Advanced Pump Technologies
72 May Holman Drive
Bassendean WA 6054
Ph: 08 6143 1000
Fx: 08 6143 1009
South Australia and Northern Territory
WBS Pumps
6A Lasalle Street
Dudley Park SA 5008
Phone:08 8344 9927
Fax:08 8344 9925
New Zealand Distributors
Christchurch (head office)
Brown Brothers Engineers
197 Durham Street
Christchurch 8011
New Zealand
Phone: 3 365 0279
Fax: 3 366 6616
Dunedin
Brown Brothers Engineers
10 Timaru Street
Dunedin 9012
New Zeland
Phone: 3 456 2562
Fax: 3 456 2564
Timaru 
Brown Brothers Engineers
Unit 6/39 North Street
Timaru 7910
New Zealand
Phone: 3 683 1686
Fax: 3 683 1687
Auckland
Brown Brothers Engineers
124A Hugo Johnston Drive
Penrose, Auckland 1061
New Zealand
Phone: 9 525 8282
Fax: 9 525 8284
Hamilton
Brown Brothers Engineers
97C Norton Road
Frankton, Hamilton 3204
New Zeland
Phone: 7 847 5280
Fax: 7 847 1580
Wellington
Brown Brothers Engineers
9 Aglionby Street
Lower Hutt, Wellington 5010
New Zealand
Phone: 4 570 1500
Fax: 4 570 1499