Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide. The GISO / GIS series back pull out, foot mounted centrifugal is no exception. The single stage end suction pump has been designed with latest CAD (Computer Aided Design) and CFD (Computational Fluid Dynamics) and is accordance with the international standard ISO 2858.  This highly efficient and flexible design makes the GISO / GIS series pump ideal for wide range of pumping applications, from water supply and irrigation to mining and building services.

Design Versions
The pump comes in two designs: “GISO” frame mount series is suitable for belt  motors and “GIS” close coupled   series is suitable for direct attachment to 2 or 4 pole IEC frame motors. The standard horizontal configuration units have a vertical centerline discharge; however these models can also be mounted in a variety of different positions including horizontal discharge, with or without vertical mounting of the pump bearing housing.

Pumped Liquid
Designed for non-combustible, low viscosity liquids, free of solids, abrasive materials and fibres.Various liquid chemical compositions are capable of being pumped through the use of a variety of construction materials and seal options (Refer to materials listed below).

Construction Material
The GISO / GIS series comes with cast iron casing wet end, SS304 impeller and wear rings and SS420 shaft as standard. In order to suit a wider range of applications, the GISO / GIS series of pump casing are also available in the following materials:

  •  EN-GJL-250 (Cast Iron)
  •  EN-GJS-450-10 (Ductile Iron)
  •  EN 1.4301 / AISI 304 (Stainless Steel 304)
  •  EN 1.4401 / AISI 316 (Stainless Steel 316)
  •  EN 1.4462 / UNS S32205 (Duplex 2205)
Xylem Water Systems Australia Pty. Ltd
Unit 3/1 Federation Way,
Chifley Business Park
3194 Mentone Victoria
Australia
Tel. +61 3-95517333
Fax +61 3-95510321
Australia Distributors

Queensland
Brown Brothers Engineers
50 Nestor Drive
Meadowbrook QLD 4131
Phone:07 3200 6488
Fax:07 3200 3822
New South Wales and Australian Capital Territory
Brown Brothers Engineers
211-215 Walters Rd
Arndell Park NSW 2148
Phone:02 9671 3666
Fax:02 9671 3644
Victoria and Tasmania
Brown Brothers Engineers
8 Damien Court
Dandenong Vic 3175
Phone:03 9793 9999
Fax:03 9793 0022
Western Australia
Advanced Pump Technologies
72 May Holman Drive
Bassendean WA 6054
Ph: 08 6143 1000
Fx: 08 6143 1009
South Australia and Northern Territory
WBS Pumps
6A Lasalle Street
Dudley Park SA 5008
Phone:08 8344 9927
Fax:08 8344 9925
New Zealand Distributors
Christchurch (head office)
Brown Brothers Engineers
197 Durham Street
Christchurch 8011
New Zealand
Phone: 3 365 0279
Fax: 3 366 6616
Dunedin
Brown Brothers Engineers
10 Timaru Street
Dunedin 9012
New Zeland
Phone: 3 456 2562
Fax: 3 456 2564
Timaru 
Brown Brothers Engineers
Unit 6/39 North Street
Timaru 7910
New Zealand
Phone: 3 683 1686
Fax: 3 683 1687
Auckland
Brown Brothers Engineers
124A Hugo Johnston Drive
Penrose, Auckland 1061
New Zealand
Phone: 9 525 8282
Fax: 9 525 8284
Hamilton
Brown Brothers Engineers
97C Norton Road
Frankton, Hamilton 3204
New Zeland
Phone: 7 847 5280
Fax: 7 847 1580
Wellington
Brown Brothers Engineers
9 Aglionby Street
Lower Hutt, Wellington 5010
New Zealand
Phone: 4 570 1500
Fax: 4 570 1499