Aquavar CPC Variable Speed Pump Controllers

Goulds Water Technology : Variable Speed Pump Controllers :

aquavar cpc

The Aquavar CPC is offered in a wall or floor mounted design up to 550 HP, 460 volt*, single phase input up to 50 HP, 208 230 volt and three phase 208-230 volt up to 100 HP *!

The latest software provides more versatility and flexibility with centrifugal pump applications than ever before! With all the available Aquavar Products, Goulds Water Technology provides the pump professional with more options for a complete variable speed pumping system.

Features and benefits

  • Pump protection built in! Protects based on RUNDRY, “DEAD-HEADING”, CAVITATION and “RUNOUT” conditions.
  • Motor protection built in! Protects based on OVERCURRENT, OVER/UNDER VOLTAGE, PHASE LOSS, SHORT CIRCUIT, GROUND FAULT, OVERTEMPERATURE.
  • Built-in line choke. Similar to a line reactor, it provides the equivalent of 3% impedance against transient voltage spikes and surges. Reduces harmonic distortion.
  • EMC/RFI filters reduce drive noise interference and emissions.
  • Multi-Pump without additional PLC’s or controls. Automatic Lead-lag and alternation up to four (4) Aquavar controlled pumps.
  • MODBUS® compatible. MODBUS is standard protocol with SCADA networks.
  • Fixed speed control relays. Control up to three fixed speed pumps with one Aquavar CPC with programmable relays (additional motor starters required).
  • Help text and programming “Wizards” to assist with set up.
  • Pressure transducer with shielded cable included.
  • Compatible with some older model Aquavars for existing multi-pump applications.
  • UL, CUL, CE approvals.
  • NEMA 1 standard design (indoor), with NEMA 12 and outdoor enclosures available.
  • Preventative maintenance reminders.
  • Dual pressure control with programmable differential pressure starting.

*Always check motor full load amps compared to drive rating.

Aquavar CPC FAQ

General Selection Tools:

Recommended Browsers: IE10 or Google Chrome

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Goulds Water Technology Dealer for additional assistance

Xylem Water Systems Australia Pty. Ltd
Unit 3/1 Federation Way,
Chifley Business Park
3194 Mentone Victoria
Australia
Tel. +61 3-95517333
Fax +61 3-95510321
Australia Distributors

Queensland
Brown Brothers Engineers
50 Nestor Drive
Meadowbrook QLD 4131
Phone:07 3200 6488
Fax:07 3200 3822
New South Wales and Australian Capital Territory
Brown Brothers Engineers
211-215 Walters Rd
Arndell Park NSW 2148
Phone:02 9671 3666
Fax:02 9671 3644
Victoria and Tasmania
Brown Brothers Engineers
8 Damien Court
Dandenong Vic 3175
Phone:03 9793 9999
Fax:03 9793 0022
Western Australia
Advanced Pump Technologies
72 May Holman Drive
Bassendean WA 6054
Ph: 08 6143 1000
Fx: 08 6143 1009
South Australia and Northern Territory
WBS Pumps
6A Lasalle Street
Dudley Park SA 5008
Phone:08 8344 9927
Fax:08 8344 9925
New Zealand Distributors
Christchurch (head office)
Brown Brothers Engineers
197 Durham Street
Christchurch 8011
New Zealand
Phone: 3 365 0279
Fax: 3 366 6616
Dunedin
Brown Brothers Engineers
10 Timaru Street
Dunedin 9012
New Zeland
Phone: 3 456 2562
Fax: 3 456 2564
Timaru 
Brown Brothers Engineers
Unit 6/39 North Street
Timaru 7910
New Zealand
Phone: 3 683 1686
Fax: 3 683 1687
Auckland
Brown Brothers Engineers
124A Hugo Johnston Drive
Penrose, Auckland 1061
New Zealand
Phone: 9 525 8282
Fax: 9 525 8284
Hamilton
Brown Brothers Engineers
97C Norton Road
Frankton, Hamilton 3204
New Zeland
Phone: 7 847 5280
Fax: 7 847 1580
Wellington
Brown Brothers Engineers
9 Aglionby Street
Lower Hutt, Wellington 5010
New Zealand
Phone: 4 570 1500
Fax: 4 570 1499