KITS INCLUDE:
• CentriPro Three Phase Motor 1.5 – 5 HP, 230 V
• CentriPro Balanced Flow® Controller with Transducer
• Goulds Water Technology Pumps GS Water End (pump)
(Note: ProPak kits do not include pressure tanks. Tanks must be ordered separately.)

A variable speed controller complete with a water end (pump) and three phase motor conveniently packed in one carton for installer convenience. Kits are available with 2, 3 or 5 HP controllers and motors from 1.5 to 5 HP. They feature pump/motor combinations sized for high speed operation, units are configured to operate between 30 and 80 hertz.

Features and Benefits

  • Simple, fast sizing
  • Range curves and selection charts generated from actual R&D tests.
  • Kits configured for 30 Hz minimum and 80 Hz maximum operation.
  • Kits use mismatched water end and motor (see component chart).
  • Wiring is as easy as standard three-wire control box- L1, L2 and Ground in from power supply – Red, Yellow, Black and Ground out to motor
  • Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
  • Three phase output to motor reduces wire cost.
  • Goulds Water Technology model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
  • New – a Switch Input for connecting a pressure switch or float switch.
  • New – Grounding provisions for transducer and transducer cable.
General Selection Tools:

Recommended Browsers: IE10 or Google Chrome

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Goulds Water Technology Dealer for additional assistance

Xylem Water Systems Australia Pty. Ltd
Unit 3/1 Federation Way,
Chifley Business Park
3194 Mentone Victoria
Australia
Tel. +61 3-95517333
Fax +61 3-95510321
Australia Distributors

Queensland
Brown Brothers Engineers
50 Nestor Drive
Meadowbrook QLD 4131
Phone:07 3200 6488
Fax:07 3200 3822
New South Wales and Australian Capital Territory
Brown Brothers Engineers
211-215 Walters Rd
Arndell Park NSW 2148
Phone:02 9671 3666
Fax:02 9671 3644
Victoria and Tasmania
Brown Brothers Engineers
8 Damien Court
Dandenong Vic 3175
Phone:03 9793 9999
Fax:03 9793 0022
Western Australia
Advanced Pump Technologies
72 May Holman Drive
Bassendean WA 6054
Ph: 08 6143 1000
Fx: 08 6143 1009
South Australia and Northern Territory
WBS Pumps
6A Lasalle Street
Dudley Park SA 5008
Phone:08 8344 9927
Fax:08 8344 9925
New Zealand Distributors
Christchurch (head office)
Brown Brothers Engineers
197 Durham Street
Christchurch 8011
New Zealand
Phone: 3 365 0279
Fax: 3 366 6616
Dunedin
Brown Brothers Engineers
10 Timaru Street
Dunedin 9012
New Zeland
Phone: 3 456 2562
Fax: 3 456 2564
Timaru 
Brown Brothers Engineers
Unit 6/39 North Street
Timaru 7910
New Zealand
Phone: 3 683 1686
Fax: 3 683 1687
Auckland
Brown Brothers Engineers
124A Hugo Johnston Drive
Penrose, Auckland 1061
New Zealand
Phone: 9 525 8282
Fax: 9 525 8284
Hamilton
Brown Brothers Engineers
97C Norton Road
Frankton, Hamilton 3204
New Zeland
Phone: 7 847 5280
Fax: 7 847 1580
Wellington
Brown Brothers Engineers
9 Aglionby Street
Lower Hutt, Wellington 5010
New Zealand
Phone: 4 570 1500
Fax: 4 570 1499